View ATC111_1075089.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

one norden lane, huntington station, n.y. 11746-2142 usa phone: 631-622-4700 fax: 631-622-4748 e-mail: sales@atceramics.com http://www.atceramics.com atc millimeter wavelength single layer capacitors ?ultra-high qs ?low cost ?dc to 50 ghz ?broadband applications ?.06 pf to 4700 pf ?not static sensitive ?capacitor arrays ?high reliability testing ?custom sizes, values, shapes, tolerances and higher voltages atc # 001-857 rev. d; 4/00 let atc assist in designing your custom component. call 631-622-4700. microcaps are carried in selected values through our quik-pick 48 hour shipment system . atc 111 series microcap capacitors have beveled edges to minimize the potential for crack propagation due to mechanical or thermal shock by eliminating abrupt metal-to-ceramic interfaces. longer arc-over paths help reduce shorting during epoxy die attachment. atc 116 series microcap capacitors have a conventional straight-sided design which allows the user the ability to match stripline widths or design a custom capacitor for limited circuit dimensions. atc 112 series bi-trim capacitors are binary capacitors in 1:2:2:4 or 1:2:4:8 configurations. this arrangement permits adjustment (trimming) of the capacity value to a desired value by connecting sections in parallel. this is a highly stable variable capacitor with none of the drawbacks of mechanically variable capacitors such as contact resistance, shock and vibration sensitivity. atc 113 series twin/cap capacitors are two capacitors on one substrate that are useful in microstrip lines to minimize lead inductance in coupling applications for frequencies as high as 50 ghz. the coupling without appreciable inductance is achieved by utilizing the two capacitors in series. the unique configuration, low-profile and low inductance twin/caps provide low insertion loss and extremely high resonant frequencies.
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 2 environmental characteristics, cont. these include the following hi-rel tests in accordance with mil-std-202: ?immersion (method 104, mil-std-202) ?resistance to soldering heat (method 210, mil-std-202) ?low voltage humidity (mil-c-49464) ?moisture resistance (method 106) ?life test at +125? and 2x rated voltage (method 108, test cond. f) ?solderability (method 208) ?voltage conditioning at +125? and 2x rated voltage (method 108, test cond. a) quality program stringent process procedures and exacting material requirements ensure that only the highest quality parts are shipped. atc's manufacturing and quality testing facilities comply with the following specifications: ?iso 10012-1 quality assurance for measuring equipment ?ansi / ncsl z540-1-1994 calibration laboratories and measuring and test equipment - general requirements atc single layer capacitors: general specifications electrical characteristics operating frequency: up to 50 ghz. resonant frequency: see curve below. standard measurement frequency: 1 mhz for .06 to 100 pf; 1 khz for values greater than 100 pf. insulation resistance: 10 11 ohms min. at +25? and rated voltage. voltage rating: 100 wvdc. consult factory for higher ratings. dielectric test voltage: 250% of voltage rating for 5 seconds. impervious to static discharge failures. mechanical characteristics hermeticity: the dielectric is virtually unaffected by moisture and commonly used cleaning solvents. rugged construction to minimize bonding problems and circuit assembly problems. bond strength: all terminations meet or exceed mil-std-883 method 2019 for die shear strength. wire bondability meets or exceeds mil-c-49464 paragraph 3.12 as well as mil-std-883 method 2011. environmental characteristics operating temperature: ?5? to +125?. (no derating of working voltage) atc parallel plate capacitors are designed and manufactured to meet or exceed the requirements of mil-c-49464. series resonance vs capacitance 0.1 1 10 100 1000 0.1 1 10 100 1000 10000 capacitance (pf) frequency (ghz) typical
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 3 dielectric code t.c. (?5? to +125?) dielectric const. (k) min. q @ 1 mhz * max. df @ 1 khz (%) j +5% to ?5% max. change (non-linear) 1100 40 2 . 0 f ?0% max. change (non-linear) 2000 40 2 . 0 g +10% to ?5% max. change (non-linear) 4500 40 2 . 0 k 0% to ?2% max. change (non-linear) 9000 25 2 . 0 dielectric code t.c. (?5? to +125?) dielectric const. (k) min. q @ 1 mhz * max. df @ 1 khz (%) da ?500 ?00 ppm/? 165 400 n/a db ?.5% max. change (non-linear) 200 400 n/a hc ?000 ?00 ppm/? 350 200 0 . 3 ea ?700 ?500 ppm/? 650 400 0 . 3 ec ?0% max. change (non-linear) 650 65 1 . 5 dielectric code t.c. (?5? to +125?) dielectric const. (k) min. q @ 1 mhz max. df @ 1 mhz (%) a +90 ?0 ppm/? 14 10,000 0 . 01 ax 0 ?0 ppm/? 23 2,000 0 . 05 ba ?0 ?0 ppm/? 36 660 0 . 15 bb 0 ?0 ppm/? 31 660 0 . 15 ca 0 ?0 ppm/? 62 660 0 . 15 cc ?50 ?00 ppm/? 130 660 0 . 15 ultra stable capacitors for filtering and tuning applications - stable k dielectric broadband applications including coupling and decoupling - mid k dielectric higher capacitance value, for by-pass and dc blocking applications - high k dielectric atc single layer capacitors: dielectric specifications * applies to values greater than 100 pf.
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 4 atc single layer millimeter wavelength microcaps : 111 & 116 series design your own single layer capacitor atc part number code 111 s ca 0r5 b 100 t t series: 111 beveled edges 116 perpendicular edges case size: see mechanical configurations; page 5. dielectric style: max. 2 characters, see specification chart; page 3. wvdc (in volts): 3 significant digits, 100 volts is standard. capacitance code: 2 significant digits, r = decimal point; number of zeros following significant digits. see pages 6 and 7 for capacitance values. capacitance tolerance code b (pf) c (pf) d (pf) f (%) g (%) j (%) k (%) m (%) tol. ? . 1 a (pf) ? . 05 ? . 25 ? . 5 ? ?% ? ?0 ?0% termination suffix code tt (standard) ap description thin film: titanium tungsten / nickel /gold 100 in. min. gold thick film: platinum gold 300 in. min. use the standard capacitance value chart on pages 6 and 7 to select a code which is within the capacity range given for a specific case size/dielectric combination. select a capacitance tolerance from the available tolerances listed in the selection chart. the above part number describes a 100 volt, t t termination (thin film), 111 series (beveled edge) capacitor, case size s (0.018 " square nominal), ca dielectric (0 ?0 ppm/?). this size/dielectric combination has a capacitance range of 0.4 to 0.9 pf and available tolerances of b, c or d. 0r5 defines a capacitance value of 0.5 pf. b tolerance (?.1 pf) was selected. atc gives you the ability to create custom values and dimensions. when circuit board area is tight or you need to match your stripline width, you can optimize the size and shape of required slcs. this same technique can be used to build special values that fall outside of the standard offerings. dielectric constant (k) design guidelines a 14 cc 130 ec 650 ax 23 da 165 j 1100 ba 36 db 200 f 2000 bb 31 hc 350 g 4500 ca 62 ea 650 k 9000 c = capacitance (pf) c = (.225 k x l x w) / (1000 t) l = length 10 to 100 mils, may not exceed 20 x t or 2.5 x w w = width 10 to 100 mils, may not exceed 20 x t t = thickness 4 to 12 mils, less than or equal to l/2 or w/2 atc slc l = length 10 to 100 mils t = thickness 4 to 12 mils w = width 10 to 100 mils custom values and sizes optimize the best combination of length, width, thickness and dielectric material for your circuit/stripline capacitor requirem ents. atc accepts orders for our parts using designations with or without the atc prefix. both methods of defining the part number are equivalent, i.e., part numbers referenced with the atc prefix are interchangeable to parts referenced without the atc prefix. customers are free to use either in specifying or procuring parts from american technical ceramics.
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 5 atc single layer millimeter wavelength microcaps : 111 & 116 series mechanical configurations - inches (mm) case code w or l t* ref. w 1 or l 1 x r** . 015 ( . 381) . 003 ( . 076) . 003 ( . 076) min. to . 012 ( . 305) max. n/a . 050 (1 . 27) . 010 ( . 254) s . 018 ( . 457) . 003 ( . 076) . 014 ( . 356) t . 025 ( . 635) . 005 ( . 127) q . 019 ( . 483) . 045 (1 . 14) u . 035 ( . 889) . 005 ( . 127) customer specified non-standard dimensions . 030 ( . 762) y . 070 (1 . 78) . 010 ( . 254) . 065 (1 . 65) z . 090 (2 . 29) . 010 ( . 254) . 085 (2 . 16) *t depends upon capacity value. **case size r is not available in 111 series. l l 1 ref w w tt 1 ref w l termination area termination area 111 series microcaps 116 series microcaps notes:
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 6 dielectric code case size l x w case size l x w case size l x w ea 2 . 7 case size l x w 7 . 5 d a 0 . 06 0 . 10 a, b 0 . 09 0 . 2 a, b, c 0 . 2 0 . 4 a, b, c, d 0 . 3 0 . 8 a, b, c, d ax 0 . 1 0 . 3 a, b, c 0 . 2 0 . 3 a, b, c 0 . 3 0 . 7 a, b, c, d 0 . 6 1 . 5 b, c, d ba 0 . 2 0 . 5 a, b, c, d 0 . 3 0 . 5 a, b, c, d 0 . 4 1 . 0 b, c, d 0 . 9 2 . 2 b, c, d bb 0 . 2 0 . 4 a, b, c, d 0 . 2 0 . 4 a, b, c, d 0 . 4 0 . 9 b, c, d 0 . 8 1 . 8 b, c, d ca 0 . 3 0 . 7 a, b, c, d 0 . 4 0 . 9 b, c, d 0 . 8 1 . 8 b, c, d 1 . 5 3 . 6 b, c, d cc 0 . 6 1 . 5 b, c, d 0 . 8 1 . 8 b, c, d 1 . 6 3 . 6 c,d 3 . 3 4 . 3 4 . 3 7 . 5 b, c, d c,d da 0 . 7 2 . 0 c, d 1 . 0 2 . 4 c, d 2 . 0 4 . 7 c, d 3 . 9 9 . 1 c, d db 0 . 9 2 . 4 c, d 1 . 2 2 . 7 c, d 2 . 4 5 . 6 c, d 5 . 1 9 . 1 9 . 1 12 c, d j, k, m hc 1 . 5 3 . 9 d 2 . 0 4 . 3 d 3 . 9 9 . 1 d 8 . 2 12 12 22 d j, k, m 3 . 9 9 . 1 d 8 . 2 18 j, k, m 15 39 k, m ec 2 . 7 7.5 d 3 . 9 9 . 1 d 8 . 2 18 j, k, m 15 39 k, m j 5 . 1 9 . 1 9 . 1 12 d k, m 6 . 8 10 10 15 d k, m 15 27 k, m 27 68 k, m f 9 . 1 22 k, m 12 27 k, m 22 56 k, m 47 120 k, m g 22 56 m 27 68 m 56 120 m 120 270 m k 47 82 m 68 120 m 120 270 m 220 560 m standard capacity values cap. cap. cap. cap. cap. cap. cap. cap. cap. cap. cap. cap. code (pf) code (pf) code (pf) code (pf) code (pf) code (pf) r06 0 . 06 0r3 0 . 3 0r9 0 . 9 1r6 1 . 6 3r0 3 . 0 5r6 5 . 6 r07 0 . 07 0r4 0 . 4 1r0 1 . 0 1r8 1 . 8 3r3 3 . 3 6r2 6 . 2 r08 0 . 08 0r5 0 . 5 1r1 1 . 1 2r0 2 . 0 3r6 3 . 6 6r8 6 . 8 r09 0 . 09 0r6 0 . 6 1r2 1 . 2 2r2 2 . 2 3r9 3 . 9 7r5 7 . 5 0r1 0 . 1 0r7 0 . 7 1r3 1 . 3 2r4 2 . 4 4r3 4 . 3 8r2 8 . 2 0r2 0 . 2 0r8 0 . 8 1r5 1 . 5 2r7 2 . 7 5r1 5 . 1 9r1 9 . 1 atc 111 & 116 series microcaps : capacitance selection chart r .015 x .015 (.381 x .381) min. (pf) max. (pf) tol. min. (pf) max. (pf) tol. s .018 x .018 (.457 x .457) min. (pf) max. (pf) tol. t .025 x .025 (.635 x .635) min. (pf) max. (pf) tol. u .035 x .035 (.889 x .889) inches (mm)
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 7 atc 111 & 116 series microcaps : capacitance selection chart dielectric code case size l x w case size l x w case size l x w ea 33 82 k, m a 0 . 7 1 . 8 b, c, d 1 . 3 3 . 6 b, c, d 2 . 2 5 . 6 b, c, d ax 1 . 1 3 . 0 b, c, d 2 . 2 5 . 6 b, c, d 3 . 6 10 b, c, d ba 1 . 8 4 . 3 b, c, d 3 . 6 7 . 5 7 . 5 9 . 1 b, c, d c, d 5 . 6 9 . 1 9 . 1 15 b, c, d f, g, j, k, m bb 1 . 5 3 . 9 b, c, d 3 . 0 6 . 8 b, c, d 5 . 6 9 . 1 9 . 1 12.0 b, c, d f, g, j, k, m ca 3 . 3 7 . 5 c, d 6 . 8 10 10 15 c, d g, j, k, m 10 27 f, g, j, k, m cc 6 . 8 9 . 1 9 . 1 15 c, d g, j, k, m 15 33 g, j, k, m 22 56 f, g, j, k, m da 8 . 2 10 10 22 d, j, k, m j, k, m 18 39 g, j, k, m 27 68 g, j, k, m db 10 22 j, k, m 22 47 g, j, k, m 33 82 g, j, k, m hc 18 39 j, k, m 33 82 j, k, m 56 150 j, k, m 56 150 j, k, m 100 270 j, k, m ec 33 82 k, m 56 150 j, k, m 100 270 j, k, m j 68 150 k, m 120 270 k, m 180 470 k, m f 100 270 k, m 220 470 k, m 330 820 m g 220 560 m 470 1000 m 820 2200 m k 470 1200 m 1000 2200 m 1500 4700 m cap. cap. cap. cap. cap. cap. cap. cap. cap. cap. cap. cap. code (pf) code (pf) code (pf) code (pf) code (pf) code (pf) 100 10 330 33 101 100 331 330 102 1000 332 3300 120 12 390 39 121 120 391 390 122 1200 392 3900 150 15 470 47 151 150 471 470 152 1500 472 4700 180 18 560 56 181 180 561 560 182 1800 220 22 680 68 221 220 681 680 222 2200 270 27 820 82 271 270 821 820 272 2700 standard capacity values min. (pf) max. (pf) tol. x .050 x .050 (1.27 x 1.27) min. (pf) max. (pf) tol. y .070 x .070 (1.78 x 1.78) min. (pf) max. (pf) tol. z .090 x .090 (2.29 x 2.29) inches (mm) special values, sizes and tolerances available upon request. consult factory.
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 8 112 series bi-trim binary capacitors part number total cap. (pf) c 1 tol. (pf) 112m3a0r9c100tt 0.9 0.1 b 112m3ca2r7c100tt 2.7 0.3 b 112n3ca9r0d100tt 9.0 1.0 c 112n3db270m100tt 27 3.0 m 112m3f900m100tt 90 10 m c 2 tol. (pf) 0.2 b 0.6 c 2.0 c 6.0 m 20 m c 4 tol. (pf) 0.4 c 1.2 c 4.0 d 12 m 40 m part number total cap. (pf) c 1 tol. (pf) 112p4a1r5c100tt 1.5 0.1 b 112p4ca4r5d100tt 4.5 0.3 c 112p4db150m100tt 15 1.0 m 112p4ec450m100tt 45 3.0 m 112r4j151m100tt 150 10 m c 2 tol. (pf) 0.2 b 0.6 c 2.0 m 6.0 m 20 m c 4 tol. (pf) 0.4 b 1.2 c 4.0 m 12 m 40 m c 8 tol. (pf) 0.8 c 2.4 d 8.0 m 24 m 80 m case size l = w inches (mm) l 1 = w 1 (ref.) m .050 .005 (1.27 0.13) .015 (0.38) n .070 .005 (1.78 0.13) .022 (0.56) l 2 = w 2 (ref.) .030 (0.76) .044 (1.12) atc part number code: 112/113 series 112 n 3 ca 9r0 d 100 t t series: 112 or 113 termination suffix: tt: titanium tungsten/nickel/gold case size code wvdc (in volts): 3 significant digits, configuration: 112 series only. 100 volts is standard. dielectric style: max. 2 characters. available in the following styles: a, ca, cc, db, hc, ec, j, f, g. see page 3 for t.c. capacitance code: 2 significant digits, r = decimal point; number of zeros following significant digits. capacitance tolerance code c (pf) d (pf) k (%) m (%) tol. 0.25 b (pf) 0.1 0.5 10 20 case size l = w inches (mm) l 1 (ref.) p .060 .005 (1.52 0.13) .019 (0.48) r .070 .005 (1.78 0.13) .022 (0.56) l 2 (ref.) .038 (0.97) .044 (1.12) w 1 (ref.) .011 (0.28) .013 (0.33) w 2 (ref.) .045 (1.14) .053 (1.34) t (thickness): . 005 (0 . 13) min. to . 010 (0 . 25) max. g: .005 nom. t (thickness): . 005 (0 . 13) min. to . 010 (0 . 25) max. g: .005 nom. w w g 1 2 w 2 l t 1 l l c 1 c 2 c 4 c 2 u g w 2 1 w w c 1 c 4 c 8 c 2 2 l t 1 l l u g g configuration 3 configuration 3 configuration 3 configuration 4 configuration 4 configuration 4 note: selected values in bold italic type are available from quik-pick see page 11. atc accepts orders for our parts using designations with or without the atc prefix. both methods of defining the part number are equivalent, i.e., part numbers referenced with the atc prefix are interchangeable to parts referenced without the atc prefix. customers are free to use either in specifying or procuring parts from american technical ceramics.
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 9 part number equivalent series cap. (pf) / tol. case size 113fca1r0c100tt 1.0 c f 113fcc2r2d100tt 2.2 d f 113fdb3r3d100tt 3.3 d f 113edb4r7d100tt 4.7 d e 113ehc6r8k100tt 6.8 k e 113ehc8r2k100tt 8.2 k e 113fec100k100tt 10 k f 113fj220m100tt 22 m f 113ej330m100tt 33 m e 113ff470m100tt 47 m f part number equivalent series cap. (pf) / tol. case size 113cca1r0c100tt 1.0 c c 113ddb2r2d100tt 2.2 d d 113dhc3r3d100tt 3.3 d d 113dhc4r7d100tt 4.7 d d 113dec6r8k100tt 6.8 k d 113dec8r2k100tt 8.2 k d 113dec100k100tt 10 k d 113df220m100tt 22 m d 113cf330m100tt 33 m c 113dg470m100tt 47 m d 113adb1r0c100tt 1 . 0 c a 113ahc2r2d100tt 2 . 2 d a 113aec3r3d100tt 3 . 3 d a 113aj4r7d100tt 4 . 7 d a 113aj6r8k100tt 6 . 8 k a 113bj8r2k100tt 8 . 2 k b 113bj100m100tt 10 m b 113ag220m100tt 22 m a 113bg330m100tt 33 m b 113bg470m100tt 47 m b atc 113 series twin/cap capacitors case size width (w) length (l) a . 025 . 003 (.635 .076) . 040 . 005 (1 . 02 0 . 13) c . 035 . 003 ( . 889 . 076) . 060 . 005 (1 . 52 0 . 13) width 1 (w 1 ) . 022 ( . 559) . 033 ( . 838) thickness (t) . 005 . 012 (0 . 13 0 . 30) length 1 (l 1 ) . 015 ( . 381) . 025 ( . 635) e . 050 . 005 (1 . 27 0 . 13) . 080 . 005 (2 . 03 0 . 13) . 035 ( . 889) . 047 (1 . 19) b d f . 050 . 005 (1 . 27 0 . 13) . 055 . 005 (1 . 4 0 . 13) . 065 . 005 (1 . 65 0 . 13) . 020 ( . 508) . 023 ( . 584) . 027 ( . 686) equivalent series cap. = the top terminations of c 1 and c 2 make direct contact with the microstrip line conductors eliminating the loss due to lead wire connections. w w 1 1 l 1 l t l c 1 c 2 u g g mechanical configurations - inches (mm) typical mounting configuration part number equivalent series cap. (pf) / tol. case size width .025 (.635) width .035 (.889) width .050 (1.27) note: selected values in bold italic type are available from quik-pick see page 11. pc board ground plane land land slc u c 1 2 c 2 2 = g: .005 nom.
111uec330k100tt 33 . 035 .889 111uec330m100tt 33 . 035 .889 111tf390m100tt 39 . 025 .635 111sg470m100tt 47 . 018 .457 111tf470k100tt 47 . 025 .635 111tf470m100tt 47 . 025 .635 111uj470m100tt 47 . 035 .889 111sg560m100tt 56 . 018 .457 111uj560m100tt 56 . 018 .457 111tg680m100tt 68 . 025 .635 111tg820m100tt 82 . 025 .635 111uf820m100tt 82 . 035 .889 111tg101m100tt 100 . 025 .635 111uf101m100tt 100 . 035 .889 111xj101m100tt 100 . 050 1.27 111tg121m100tt 120 . 025 .635 111ug221m100tt 220 . 035 .889 111xg471m100tt 470 . 050 1.27 111yg102m100tt 1000 . 070 1.78 111zg102m100tt 1000 . 090 2.29 111zg182m100tt 1800 . 090 2.29 american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 10 name: cust. p.o. #: date: phone: bill to: ship to: fax: application/program: (this line for atc use only) cust. order #: atc order #: cap. (pf) 111sa0r1b100tt 0 . 1 . 018 .457 111sbb0r2b100tt 0 . 2 . 018 .457 111ta0r2b100tt 0 . 2 . 025 .635 111sbb0r3b100tt 0 . 3 . 018 .457 111sca0r4b100tt 0 . 4 . 018 .457 111tbb0r4b100tt 0 . 4 . 025 .635 111sca0r5b100tt 0 . 5 . 018 .457 111tbb0r5b100tt 0 . 5 . 025 .635 111sca0r6b100tt 0 . 6 . 018 .457 111sca0r7b100tt 0 . 7 . 018 .457 111ua0r7b100tt 0 . 7 . 035 .889 111scc0r9c100tt 0 . 9 . 018 .457 111scc1r0c100tt 1 . 0 . 018 .457 111xa1r0b100tt 1 . 0 . 050 1.27 111tca1r1c100tt 1 . 1 . 025 .635 111tca1r2c100tt 1 . 2 . 025 .635 111tca1r3c100tt 1 . 3 . 025 .635 111sdb1r5d100tt 1 . 5 . 018 .457 111uca1r8c100tt 1 . 8 . 035 .889 111sdb2r0d100tt 2 . 0 . 018 .457 111uca2r4d100tt 2 . 4 . 035 .889 111xbb2r4c100tt 2 . 4 . 050 1.27 111shc3r0d100tt 3 . 0 . 018 .457 111tcc3r0d100tt 3 . 0 . 025 .635 111tdb3r0d100tt 3 . 0 . 025 .635 111uca3r0d100tt 3 . 0 . 035 .889 111 series quik-pick part numbers kits w = width inches (mm) order any of the values below in quantities up to 500 pieces or design your custom kit as described for quik-pick 48 hour shipment. part number w (mm) cap. (pf) 111sec4r3d100tt 4 . 3 . 018 .457 111za4r3c100tt 4 . 3 . 090 2.29 111sec5r1c100tt 5 . 1 . 018 .457 111thc5r1d100tt 5 . 1 . 025 .635 111udb5r1d100tt 5 . 1 . 035 .889 111xca5r1d100tt 5 . 1 . 050 1.27 111thc5r6d100tt 5 . 6 . 025 .635 111sj100k100tt 10 . 018 .457 111sj100m100tt 10 . 018 .457 111tec100m100tt 10 . 025 .635 111yca100k100tt 10 . 070 1.78 111sj120m100tt 12 . 018 .457 111uhc120m100tt 12 . 035 .889 111xdb120k100tt 12 . 050 1.27 111sj150k100tt 15 . 018 .457 111sj150m100tt 15 . 018 .457 111tec150m100tt 15 . 025 .635 111tec180m100tt 18 . 025 .635 111sf220k100tt 22 . 018 .457 111sf220m100tt 22 . 018 .457 111tj220k100tt 22 . 025 .635 111tj220m100tt 22 . 025 .635 111xhc220k100tt 22 . 050 1.27 111tf270m100tt 27 . 025 .635 111tj270m100tt 27 . 025 .635 111tf330m100tt 33 . 025 .635 part number w (mm) fax this form to atc at: 631-622-4748 quik-pick 48 hr. system shipment for atc 111 series microcaps engineering design values you select. just pick the values from the list above and we will send you 5 pieces each of those valu es. there are 4 inexpensive kit sizes and all offer the atc standard termination tt (titanium tungsten/nickel/gold). ? 111sl1025 5 different values $60.00 (25 pieces) ? 111sl1075 15 different values $180.00 (75 pieces) ? 111sl1050 10 different values $120.00 (50 pieces) ? 111sl1100 20 different values $240.00 (100 pieces) part number w (mm) cap. (pf)
american technical ceramics ?one norden lane, huntington station, n.y. 11746-2142 phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales @ atceramics.com ?http://www.atceramics.com 11 total cap. val. (pf) 112m3a0r9c100tt 0 . 10 . 20 . 40 . 9 112m3f900m100tt 10 20 40 90 112n3ca9r0d100tt 1 2 4 9.0 equivalent series cap. (pf / tol.) 113adb1r0c100tt 1 . 0 c 113aec3r3d100tt 3 . 3 d 113bj8r2k100tt 8 . 2 k 113bj100m100tt 10 m 113bg330m100tt 33 m quik-pick 48 hour system shipment for atc 112 series/113 series 112 series quik-pick part numbers kits 113 series quik-pick part numbers configuration 3 equivalent series cap. (pf / tol.) 113cca1r0c100tt 1 . 0 c 113dhc3r3d100tt 3 . 3 d 113dec8r2k100tt 8 . 2 k 113dec100k100tt 10 m 113cf330m100tt 33 m equivalent series cap. (pf / tol.) 113fca1r0c100tt 1 . 0 c 113fdb3r3d100tt 3 . 3 d 113ehc8r2k100tt 8 . 2 k 113fec100k100tt 10 m 113ej330m100tt 33 m total cap. val. (pf) 112p4a1r5c100tt 0 . 10 . 20 . 40 . 81 . 5 112p4db150m100tt 1 2 4 8 15 112r4j151m100tt 10 20 40 80 150 configuration 4 w w g 1 2 w 2 l t 1 l l c 1 c 2 c 4 c 2 u g w 2 1 w w c 1 c 4 c 8 c 2 2 l t 1 l l u g g w w 1 c 1 c 2 g 1 l 1 l t l u g configuration 3 configuration 4 part number part number width = .025 ?003 part number width = .035 ?003 part number width = .050 ?003 part number c1 c1 c2 c3 c4 c2 c4 fax this form to atc at: 631-622-4748 engineering design values you select. just pick the values from the list above and we will send you 5 pieces each of those valu es. there are 3 inexpensive kit sizes and all offer the atc standard termination tt (titanium tungsten/nickel/gold). ? 111sl2025 5 different values $75.00 (25 pieces) ? 111sl2075 15 different values $150.00 (75 pieces) ? 111sl2050 10 different values $225.00 (50 pieces) name: cust. p.o. #: date: phone: bill to: ship to: fax: application/program: (this line for atc use only) cust. order #: atc order #: order any of the values below in quantities up to 500 pieces or design your custom kit as described for quik-pick 48 hour shipment.
atc has made every effort to have this information as accurate as possible. however, no responsibility is assumed by atc for it s use, nor for any infringements of rights of third parties which may result from its use. atc reserves the right to revise the content or modify its product line without prior notice. ? 1997 american technical ceramics atc # 001-857 rev. d; 4/00 one norden lane, huntington station, n.y. 11746-2142 usa phone: 631-622-4700 ?fax: 631-622-4748 ?e-mail: sales@atceramics.com http://www.atceramics.com

▲Up To Search▲

Price & Availability of ATC111

	To Download ATC111 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .